Power Factor (Typ.)
|
PF>0.95/115VAC, PF>0.9/230VAC, PF>0.9/277VAC
at full load (Please refer to "Power Factor
Characteristic" curve) |
AC Inrush Current (max.) |
COLD START 35A(twidth=25µ s measured at
50% Ipeak) at 230VAC |
Over Current protection |
100 ~ 110%
Protection type : Constant current limiting, recovers
automatically after fault condition is removed |
SHORT CIRCUIT protection |
Hiccup mode, recovers automatically after fault
condition is removed. |
Over Voltage protection |
10V ~ 63V
Protection type : Shut down o/p voltage, re-power
on to recover |
Working temperature |
-30°C ~ 50°C (Refer to "Derating Curve") |
Safety standards |
UL879, UL1310, CSA C22.2 No. 207-M89(except for
48V), TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2
No.223-M91 (except for 48V),IP64, J61347-1,J61347-2-13
approved |
EMC EMISSION |
Compliance to EN55015, EN61000-3-2 Class C
(pin≥25W), Class D (>70% load) ; EN61000-3-3 |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,
EN61547, light industry level, criteria B |
Packing |
0.22Kg; 60pcs/ 14.2Kg/ 1.25CUFT |