E-Star Power Supply Mail to Us power supply products
| AC DC Power Supply | | Medical Power Supply | | DC DC Power Supply | | AC POWER CORD |- | Contact Us | - | Home |
 
AC DC Power Supply
> Led Driver Power Supply
> 25W

> PLD-25
 
 
 
 
 

AC DC Power Supply > Led Lighting Control Driver Power Supply > 25W > PLD-25
LED power supply_PLD-25
Features :

Universal AC input / Full range (up to 295VAC)
Fully isolated plastic case
Constant current design
Protections: Short circuit / Over temperature
Built-in active PFC function
Cooling by free air convection
Class 2 Power Unit
Class II power unit, no FG
IP30 design
100% full load burn-in test
Low cost
High reliability
Suitable for dry / damp locations
3 years warranty
Model No. :

PLD-25
AC input voltage range

90 ~ 295VAC 127 ~ 417VDC
Power Factor (Typ.)
 PF>0.98/115VAC, PF>0.92/230VAC, PF>0.91/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
AC Inrush Current (Typ.) COLD START 15A (twidth=75µs measured at 50% Ipeak) at 230VAC
Leakage Current <0.5mA / 240VAC
SHORT CIRCUIT protection Hiccup mode, recovers automatically after fault condition is removed.
Working temperature -30°C ~ +60°C (Refer to "Derating Curve")
Safety standards UL8750, CSA C22.2 No. 250.0-08 (except for PLD-25-350, PLD-25-700), ENEC EN 61347-1, EN 61347-2-13 independent, EN 62384, IP30 approved ; design refer to UL60950-1, TUV EN60950-1
Withstand voltage I/P-O/P:3.75KVAC
EMC EMISSION

Compliance to EN55015, EN61000-3-2 Class C (≥75% load) ; EN61000-3-3, FCC part 18 non-consumer equipment
EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A
Packing 0.19Kg; 72pcs/ 14.7Kg/ 0.75CUFT
Dimension 84*57*29.5mm (L*W*H)
P/No. DC Voltage Range Output Rated Current R & N
 Effi.
PLD-25-350 36~58V 350mA 4.6Vp-p 85%
PLD-25-700 24~36V 700mA 2.7Vp-p 86%
PLD-25-1050 16~24V 1050mA 2.2Vp-p 85%
PLD-25-1400 12~18V 1400mA 2Vp-p 84%
 
Download PDF Here
< back >
 
--- E-Star Power Development Co., Ltd.