E-Star Power Supply Mail to Us power supply products
| AC DC Power Supply | | Medical Power Supply | | DC DC Power Supply | | AC POWER CORD | - | Contact Us | - | Home |
 
AC DC Power Supply
> Led Driver Power Supply
> 150W
> LPV-150
 
 
 
 
 
AC DC Power Supply > Led Lighting Control Driver Power Supply > 150W > LPV-150
led_driver power supply_LPV-150
Features :

* Constant voltage design
* 90~132VAC input for LPVL-150
80~305VAC input for LPV-150
* Fully encapsulated with IP 67 level
* Class II power unit, no FG
* Protections: Short circuit/ Overload/ Over voltage/ Over temperature
* Fully isolated plastic case
* Fanless design, cooling by free air convection
* 100% full load burn-in test
* Low cost, high reliability
* Listed in UL Sign Component Manual (SAM)
* Type "HL" for use in class I, Division 2 hazardous (Classified) location luminaires for LPVL-150
* 2 years warranty

Model No. : LPV-150
AC input voltage range

LPV-150: 180 ~ 305VAC 254 ~ 431VDC
LPVL-150: 90~132VAC 254 ~ 370VDC

AC Inrush Current (Typ.) Blank type : COLD START 60A(twidth=900 s measured at 50% Ipeak) at 230VAC
L type : COLD START 75A(twidth=900 s measured at 50% Ipeak) at 115VAC
Leakage Current LPV-150: 0.25mA/ 240VAC
LPVL-150:0.25mA/ 120VAC
OVERLOAD 110~150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over Voltage protection 13.5 ~ 18V, 17 ~ 25V, 27 ~ 35V, 40 ~ 49V, 52 ~ 63V
Protection type : Shut down o/p voltage, re-power on to recover
Working temperature -25 ~ +65 (Refer to "Derating Curve")
Withstand voltage

I/P-O/P:3KVAC

Safety standards Blank type : UL8750,CSAC22.2 No 250.13-12 UL879,CSAC22.2 No.207-M89,BIS IS15885(for LPV-150-12,24 only), , EAC TP TC 004, IP67 approved. Design refer to EN60950-1
L type : UL8750(type”HL”),CSAC22.2 No 250.13-12 UL879,CSAC22.2 No.207-M89,IP67 approved
EMC EMISSION Blank type : Compliance to EN55032 (CISPR32) Class B, EN61000-3-2 ClassA( 80 load), EN61000-3-3, EAC TP TC 020
L type : Compliance to FCC part 15
EMC IMMUNITY Blank type: Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteriaA, EAC TP TC 020
L type : Design refer to IEC61000-4-2,3,4,5,6,8,11; light industry level, criteriaA
Packing LPV-150: 0.74Kg;20pcs/15.8Kg/0.95CUFT; LPVL-150: 0.85Kg;20pcs/17Kg/0.95CUFT
Dimension 191*63*37.5mm (L*W*H)
P/No.

DC Voltage

Output Rated Current

Voltage Tol. R & N
Effi.
LPV[]-150-12 12V 10A ±5% 200mVp-p 87%
LPV[]-150-15 15V 8A ±5% 200mVp-p 88%
LPV[]-150-24 24V 6.3A ±5% 200mVp-p 89%
LPV[]-150-36 36V 4.2A ±5% 200mVp-p 89%
LPV[]-150-48 48V 3.2A ±5% 200mVp-p 90%
 
Download PDF Here
< back >
 
--- E-Star Power Development Co., Ltd.