| AC
input voltage range |
90 ~ 305VAC, 127 ~ 431VDC
(Please refer to "STATIC CHARACTERISTIC" section) |
Power Factor (Typ.)
|
PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
| AC Inrush Current (Typ.) |
COLD START 65A(twidth=425μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
| Over Current protection |
95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage protection |
41 ~ 47V, 54 ~ 62V, 65 ~ 75V
Shut down o/p voltage with auto-recovery or re-power on to recovery |
| Over Temperature |
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working temperature |
Ta=-40 ~ +45℃(Please refer to " OUTPUT LOAD vs TEMPERATURE" section) |
| Safety standards |
UL8750,CSA C22.2 No.250.13-12; ENEC EN61347-1,EN61347-2-13,EN62384, GB19510.1,GB19510.14 approved |
| Withstand voltage |
I/P-O/P:3.75KVAC
I/P-FG:2KVAC
O/P-FG:0.5KVAC |
| EMC EMISSION |
Compliance to EN55015, EN61000-3-2 Class C (@load ≧60%) ; EN61000-3-3, GB17743, GB17625.1 |
| EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547,light industry level(surge immunity:Line-Earth:4KV,Line-Line:2KV) |
| MTBF |
195.5Khrs min. MIL-HDBK-217F (25℃) |
| Packing |
0.4Kg; 36pcs/15.4Kg/1.35CUFT |
| Dimension |
Refer to mechanical specification |
